ABB YPC104C 3BSE005711R1 Modem Board丨New In Stock

ABB YPC104C 3BSE005711R1 Main features

ABB YPC104C is a capacitor produced by ABB, which is usually used in power factor correction (PFC) or filtering applications in power systems.

Model: YPC104C
Type: Power capacitor (low voltage or medium voltage, depending on the series)
Application: Power factor correction, harmonic filtering, power quality improvement
Rated voltage: Please refer to the product manual for specific voltage levels (common ones are 400V, 440V, 480V, etc.)
Rated capacity: Usually in kVAR (kilovar), the specific capacity needs to be confirmed according to the model
Frequency: 50Hz or 60Hz, suitable for global standard power systems
Dielectric: Usually dry or oil-immersed dielectric, with high reliability and long life

ABB YPC104C 3BSE005711R1 Typical Applications

Power Factor Correction: used in industrial, commercial and residential power systems to improve power factor and reduce reactive power loss.
Harmonic Filtering: used in conjunction with reactors to filter out harmonics in the power system and improve power quality.
Power Quality Improvement: reduce voltage fluctuations and improve system stability.

ABB YPC104C 3BSE005711R1 Technical parameters (example)

ABB YPC104C 3BSE005711R1 Selection suggestions

Voltage matching: Make sure the rated voltage of the capacitor matches the system voltage.
Capacity selection: Select the appropriate kVAR value based on the reactive power demand of the system.
Harmonic environment: If there are harmonics in the system, a filter capacitor bank with a reactor must be selected.
Installation environment: Consider environmental factors such as temperature and humidity to select the appropriate capacitor type.

ABB YPC104C 3BSE005711R1 Installation and maintenance

*Installation method:

Usually installed in the distribution cabinet or capacitor bank cabinet, ensure good ventilation.

*Maintenance suggestions:

Regularly check the appearance, wiring and operating status of the capacitor.
If the capacitor is swollen, leaking or has abnormal temperature, it needs to be replaced in time.
Use a discharge resistor to ensure that the capacitor is safely discharged after power failure.