ABB YPC104C 3BSE005711R1 Main features
ABB YPC104C is a capacitor produced by ABB, which is usually used in power factor correction (PFC) or filtering applications in power systems.
-
Model: YPC104C
-
Type: Power capacitor (low voltage or medium voltage, depending on the series)
-
Application: Power factor correction, harmonic filtering, power quality improvement
-
Rated voltage: Please refer to the product manual for specific voltage levels (common ones are 400V, 440V, 480V, etc.)
-
Rated capacity: Usually in kVAR (kilovar), the specific capacity needs to be confirmed according to the model
-
Frequency: 50Hz or 60Hz, suitable for global standard power systems
-
Dielectric: Usually dry or oil-immersed dielectric, with high reliability and long life
ABB YPC104C 3BSE005711R1 Typical Applications
-
Power Factor Correction: used in industrial, commercial and residential power systems to improve power factor and reduce reactive power loss.
-
Harmonic Filtering: used in conjunction with reactors to filter out harmonics in the power system and improve power quality.
-
Power Quality Improvement: reduce voltage fluctuations and improve system stability.
ABB YPC104C 3BSE005711R1 Technical parameters (example)
-
Rated voltage: 400V or 480V (depending on the model)
-
Rated capacity: 10 kVAR, 15 kVAR or other (depending on the model)
-
Frequency: 50Hz / 60Hz
-
Temperature range: -25°C to +50°C (operating environment)
-
Installation: Wall-mounted or cabinet-mounted
-
Protection level: Usually IP20 or higher
ABB YPC104C 3BSE005711R1 Selection suggestions
-
Voltage matching: Make sure the rated voltage of the capacitor matches the system voltage.
-
Capacity selection: Select the appropriate kVAR value based on the reactive power demand of the system.
-
Harmonic environment: If there are harmonics in the system, a filter capacitor bank with a reactor must be selected.
-
Installation environment: Consider environmental factors such as temperature and humidity to select the appropriate capacitor type.
ABB YPC104C 3BSE005711R1 Installation and maintenance
*Installation method:
-
Usually installed in the distribution cabinet or capacitor bank cabinet, ensure good ventilation.
*Maintenance suggestions:
-
Regularly check the appearance, wiring and operating status of the capacitor.
-
If the capacitor is swollen, leaking or has abnormal temperature, it needs to be replaced in time.
-
Use a discharge resistor to ensure that the capacitor is safely discharged after power failure.