English
italiano
العربية
فارسی
Indonesia
हिन्दी
Melayu
русский
Tiếng Việt
ไทย
GE Fanuc IC693CHS392 10-Slot Expansion Rack Controller
GE Fanuc IC693CHS392 10-Slot Expansion Rack Controller 100% Brand New. 365 days warranty.
item no.:
IC697CPX928-HFlead time:
2-3daysproduct orgin:
USApayment:
T/TCondition:
new
Single slot CPU with three serial ports
Provides 6 Mbytes of battery-backed memory in the same slot
Contains 256K of non-volatile user flash memory
Supports BMA in release 7.92 and later
Supports floating point calculations
12K inputs and outputs (any mix), and up to 8K analog I/O
0.4 microseconds per boolean function
96 MHz, 80486DX4 microprocessor
Supports IC66 (can be IC660 or IC661) and IC697 I/O
Configurable data and program memory
Battery-backed calendar clock
Three position operation mode switch
Password controlled access
Remote programmer keyswitch
memory protection
Seven status LEDs
Software configuration (No DIP switches
or jumpers)
Reference information inside front door
In-system upgradable firmware
IC697CPX928-HF Functions
The CPX 928 is a single slot PLC CPU that is programmed and configured by MS-DOS or Windows based programming software to perform real time control of machines, processes and material handling systems. It communicates with I/O and smart option modules over the rack-mounted backplane using the VME C.1 Standard format.
Supported option modules include LAN Interface modules, Programmable Coprocessor, Alphanumeric Display Coprocessor, Bus Controller for IC660/661 I/O products, Communications modules, I/O Link Interface, and all of the IC697 family of discrete and analog I/O modules.
5 years at 20 C (68 F)
6 months nominal without applied power.
3.1 Amps nominal
0 to 60C (32F to 140F); 70 CFM forced air required
0 to 50C (32F to 122F); without forced air
3.5 seconds per day maximum
Elapsed Time Clock (internal timing) accuracy
01% maximum
System designed to support the VME standard C.1
GE Fanuc IC693CHS392 10-Slot Expansion Rack Controller 100% Brand New. 365 days warranty.
GE Fanuc IC693ALG223 input module PLC 100% Brand New. 365 days warranty.
GE Fanuc IC695CPU310 CPU PAC Systems RX3i Computer Accessorise 100% Brand New. 365 days warranty.
GE Fanuc IC693CMM321 Ethernet Controller CMM-321 100% Brand New. 365 days warranty.
GE Fanuc IC698CPE010 Processor Module CPU 100% Brand New. 365 days warranty.
GE Fanuc IC697CPX772 CENTRAL PROCESSO UNIT 100% Brand New. 365 days warranty.
GE Fanuc IC698CPE020 RX7i CPU MODULE 100% Brand New. 365 days warranty.
GE Fanuc IC693MDL645 Input Module NEW 100% Brand New. 365 days warranty.
GE Fanuc IC693CHS392 10-Slot Expansion Rack Controller 100% Brand New. 365 days warranty.
GE Fanuc IC693ALG223 input module PLC 100% Brand New. 365 days warranty.
GE Fanuc IC695CPU310 CPU PAC Systems RX3i Computer Accessorise 100% Brand New. 365 days warranty.
GE Fanuc IC693CMM321 Ethernet Controller CMM-321 100% Brand New. 365 days warranty.
GE Fanuc IC698CPE010 Processor Module CPU 100% Brand New. 365 days warranty.
GE Fanuc IC697CPX772 CENTRAL PROCESSO UNIT 100% Brand New. 365 days warranty.
GE Fanuc IC698CPE020 RX7i CPU MODULE 100% Brand New. 365 days warranty.
GE Fanuc IC693MDL645 Input Module NEW 100% Brand New. 365 days warranty.
To get lowest price with best original quality,pls don`t hesitate to leave a message here.Thank you!
Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen (Building B of Diamond Coast)
