English
italiano
العربية
فارسی
Indonesia
हिन्दी
Melayu
русский
Tiếng Việt
ไทย
GE Fanuc IC698CPE010 Processor Module CPU
GE Fanuc IC698CPE010 Processor Module CPU 100% Brand New. 365 days warranty.
item no.:
IS220PAOCH1Alead time:
1-3 daysproduct orgin:
USAshipping port:
Xiamenpayment:
T/Tprice:
$1/9999market price:
$999Condition:
NewGE IS220PAOCH1A Functional Description
The Analog Output (PAOC) pack provides the electrical interface between one or two I/O Ethernet networks and an analog output terminal board. The pack contains a processor board common to all Mark* VIe distributed I/O packs and an acquisition board pair specific to the analog output function. The pack is capable of providing up to eight simplex 0-20 mA current loop outputs and includes an analog to digital converter for current feedback from each output.
Input to the pack is through dual RJ45 Ethernet connectors and a three-pin power input. Output is through a DC-37 pin connector that connects directly with the associated terminal board connector. Visual diagnostics are provided through indicator LEDs, and local diagnostic serial communications are possible through an infrared port.
PAOCH1A is compatible with the analog output terminal board TBAOH1C, and the STAO board, but not the DIN-rail mounted DTAO board. The following table gives details of the compatibility:
Control mode refers to the number of I/O packs used in a signal path:
• Simplex uses one I/O pack with one or two network connections.
• Dual uses two I/O packs with one or two network connections.
• TMR uses three I/O packs with one network connection on each.
While the PAOC will mount on a TBAOH1A or TBAOH1B terminal board, the pack will not realize full accuracy of the analog signals due to circuit differences between the terminal board revisions. For this reason, the PAOC is only compatible with the H1C version of TBAO and will report a board compatibility problem with any of the earlier revisions. No physical damage will result if a PAOC is powered up on an older board in error.
1 Securely mount the desired terminal board.
2 Directly plug one PAOC I/O pack for simplex or three PAOC I/O packs for TMR into the terminal board connectors.
3 Mechanically secure the packs using the threaded studs adjacent to the Ethernet ports. The studs slide into a mounting bracket specific to the terminal board type. The bracket location should be adjusted such that there is no right-angle force applied to the DC-37 pin connector between the pack and the terminal board. The adjustment should only be required once in the life of the product.
4 Plug in one or two Ethernet cables depending on the system configuration. The pack will operate over either port. If dual connections are used, the standard practice is to connect ENET1 to the network associated with the R controller.
5 Apply power to the pack by plugging in the connector on the side of the pack. It is not necessary to insert this connector with the power removed from the cable as the I/O pack has inherent soft-start capability that controls current inrush on power application.
6 Configure the I/O pack as necessary.
GE Fanuc IC698CPE010 Processor Module CPU 100% Brand New. 365 days warranty.
GE Fanuc IC697CPX772 CENTRAL PROCESSO UNIT 100% Brand New. 365 days warranty.
GE Fanuc IC698CPE020 RX7i CPU MODULE 100% Brand New. 365 days warranty.
GE Fanuc IC693MDL645 Input Module NEW 100% Brand New. 365 days warranty.
GE Fanuc IC693CHS392 10-Slot Expansion Rack Controller 100% Brand New. 365 days warranty.
GE Fanuc IC693ALG223 input module PLC 100% Brand New. 365 days warranty.
GE Fanuc IC695CPU310 CPU PAC Systems RX3i Computer Accessorise 100% Brand New. 365 days warranty.
GE Fanuc IC693CMM321 Ethernet Controller CMM-321 100% Brand New. 365 days warranty.
To get lowest price with best original quality,pls don`t hesitate to leave a message here.Thank you!
Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen (Building B of Diamond Coast)
