YOKOGAWA 96033 Clamp-on Probe MODEL

YOKOGAWA Clamp-on Probe

item no.:
96033
lead time:
2-3days
product orgin:
JAPAN
payment:
T/T
Condition:
new

product details

96033 Specifications

Item: Model 96033
Measurement range：0 to 50 Arms AC
Output voltage: 0 to 0.5 Vrms AC (10 mV/A)
Amplitude: ±1% rdg ± 0.3 mV (20 Hz to 45 Hz)
±0.5% rdg ± 0.1 mV (45 Hz to 66 Hz)
±0.8% rdg ± 0.2 mV (66 Hz to 1 kHz)
±1% rdg ± 0.3 mV (1 kHz to 5 kHz)
±3% rdg ± 0.4 mV (5 kHz to 20 kHz)
Phase:Within ±1°(45 Hz to 1 kHz)
Temperature coefficient:0.05% of full scale/°C over 0 to 18°C and 28 to 50°C ranges
Maximum allowed current：130 Arms AC (45 Hz to 1 kHz)
Output impedance: Approx. 18 Ω
External magnetic field effects：0.1 A equivalent or less(at 400 A/mA, 50/60 Hz)
Connector position effects: Within ±0.5% (1 to 50 A, 45 Hz to 1 kHz)
The RATED circuit-to-earth voltage：300 Vrms AC max
Withstand voltage: 3.7 kVrms AC for one minute,(between core and case and between core and output)
Measurable conductor diameter：diameter 18 mm max.
Operating temperature and humidity: 0 to 50°C, 5 to 85% RH (no condensation)
Storage temperature and humidity：-20 to 60°C, 90% RH max.(no condensation)
External dimensions: Approx. 52 (W) × 106 (H) × 25 (D) mm(excluding protrusions)
Weight：Approx. 220 g
Output cable length: Approx. 3 m(Output terminal: Safety banana plug)
Accessory: User's manual (1 copy), Ring markers (4 colors × 2): L4007MG

96033 Precise Measurements

Use this product under the following ambient conditions.
Temperature: 23 ±5°C
Relative humidity: 35 to 75% (no condensation)
When performing a measurement, hold the probe so that the measured conductor cable runs at the center of the clamp.
Ensure that the orientation of the clamp to the direction of the conductor cable (power source load) is correct as shown right.
Ensure that the clamping JAWS are properly closed.