English
italiano
العربية
فارسی
Indonesia
हिन्दी
Melayu
русский
Tiếng Việt
ไทย
YOKOGAWA SCP451-11 PROCESSOR MOUDLE CPU
YOKOGAWA SCP451-11 PROCESSOR MOUDLE CPU 100% Brand New. 365 days warranty.
item no.:
AAM10lead time:
2-3 work daysproduct orgin:
Japanshipping port:
Xiamen Chinapayment:
T/Tmarket price:
$999price range:
1-999/1$color:
Depends on the materialAAM10/AAM11/AAM11B In Stock
A2SAM105 (For Upgrade AAM10/AAM11/AAM11B)
Voltage Input range: 0 to 10 V DC
Current Input range: 0 to 20 mA DC (*2)
Data update period: For A2SAM105 alone : 2 ms (*7)
Extended function: Current input, voltage input, and isolated channels
Withstanding voltage: Between field and the system: 1500 V AC for 1 minute, 42 V DC
Mounting: Mounted on the nest for I/O adaptor (A2BA3D)
Wiring connection: Connected to the terminals of the A2BA3D (with M4 screws or ELCO connector)
Input signal setting: Input signals and input signal ranges are set by the software
Weight: 0.1kg
*1: An auxiliary voltage output equipped with AAM11 and AAM11B is not available for A2SAM105.
*2: The combination with MTL barrier 728 is valid, however, the minimum operating voltage of a 2-wire transmitter must be 12 V DC or lower where the wiring resistance is 10 Ω.
*3: The module input resistance viewed from the terminals is calculated as below: 240 Ω + (voltage drop in the input protection circuit / current value).
*4: When the power of A2SAM105 is off or overcurrent is detected, the current input loop is open.
*5: Operation when A2SAM105 detects over current depending on style is different. Style S1 : When over current is detected and the protection circuit operates, the system alarm (Adaptor Fail) is notified to HIS. Style S2 or later : When over current is detected and the protection circuit operates, the system alarm (Adaptor Fail) is not notified to the HIS. The abnormal state is detected as IOP (input open).
*6: If the input current is 25 to 40 mA due to the inrush current of the equipment or the like, connect a zener diode and bypass the current. For details, refer to "CENTUM VP Installation Guidance" (TI 33J01J10-01EN).
*7: The data update period is max. 10 ms, when the A2SAM105 is used with the A2MME041 I/O module.
*8: The internal power supply is empowered by I/O modules housed in the A2BA3D.
*9: The BRAIN communication function supported by AMM11B is not available for A2SAM105.
*10: Up to 5 HART communication field devices (e.g. transmitter) can be connected to A2SAM105 by multi drop connection. A2SAM105 can drive up to 24 mA including inrush current of field devices.
YOKOGAWA SCP451-11 PROCESSOR MOUDLE CPU 100% Brand New. 365 days warranty.
YOKOGAWA EB401-10 COMMUNICATION MODULE DCS CS-3000 NEW 100% Brand New. 365 days warranty.
YOKOGAWA PCB Card
YOKOGAWA AAI543-S00 Analog Output Module JAPAN MADE 100% Brand New. 365 days warranty.
YOKOGAWA ESB Bus Cable (36-36 pins)
YOKOGAWA CP345 CPU PROCESSOR MODULE JAPAN 100% Brand New. 365 days warranty.
YOKOGAWA PW482-10 Power Supply Module ORIGINAL JAPAN PW482 100% Brand New. 365 days warranty.
YOKOGAWA Base module
To get lowest price with best original quality,pls don`t hesitate to leave a message here.Thank you!
Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen (Building B of Diamond Coast)
