YOKOGAWA SCP451-11 PROCESSOR MOUDLE CPU
YOKOGAWA SCP451-11 PROCESSOR MOUDLE CPU 100% Brand New. 365 days warranty.
item no.:
SCP461-51lead time:
2-3 work daysproduct orgin:
Japanshipping port:
Xiamen Chinapayment:
T/Tmarket price:
$999price range:
1-999/1$color:
Depends on the materialSCP461-51 Configuration
The DIP switches for setting domain number and station numbers are placed at the rear part of the processor module. When setting the DIP switches, it is necessary to remove the processor module from the safety control unit.
SCP461-51 Overview Figure
1. Make sure that the DIP switches for the domain and station numbers as well as the front DIP switches for negotiation set on the processor module to be installed are the same as on the module to be replaced.
2. Make sure that the BATTERY ON/OFF switch is at the OFF position.
3. Connect the cables to both ports of BUS1 and BUS2. There is no need to turn off the power of the Layer2 Switch.
4. Install the processor module into the base unit. Make sure that the processor module is firmly inserted into the slot at the backboard.
5. Fasten the screws that fix the processor module.
6. Put the BATTERY ON/OFF switch to ON position.
7. Check the front lamps or the SCS state management window to make sure that the processor module is normal.
Check the diagnostic information window on the SENG for any errors.
• If the processor modules are dual-redundantly configured, the program is copied automatically.
The processor becomes standby status after copying.
• If the processor module is not redundantly configured, you need to perform master database offline download.
To get lowest price with best original quality,pls don`t hesitate to leave a message here.Thank you!