English
italiano
العربية
فارسی
Indonesia
हिन्दी
Melayu
русский
Tiếng Việt
ไทย
YOKOGAWA SCP451-11 PROCESSOR MOUDLE CPU
YOKOGAWA SCP451-11 PROCESSOR MOUDLE CPU 100% Brand New. 365 days warranty.
item no.:
SDV531-L63lead time:
2-3 work daysproduct orgin:
Japanshipping port:
Xiamen Chinapayment:
T/Tmarket price:
$999price range:
1-999/1$color:
Depends on the materialSDV531-L63 Specifications
Model：SDV531-L63
Number of outputs： 8-channel, module isolation (*3)
Output voltage： 24 V DC
Output voltage drop: 1 V maximum
External power supply rating: 24 V DC, 5 A minimum
External power supply: 24 V DC +20 %/–10 % (*4)
Current capacity: 5 A
Maximum leak current at output off status: 1.6 mA
Output format: Current source
Maximum load current: 0.6 A/output line (4.8 A in total output lines) (*3) (*5)
Minimum load current: 35 mA
Load resistance range: 40 to 685 Ω (*6)
Output response time: 30 ms maximum
*1: These voltages show the case using the field power supply floating. When the field power supply is grounded, the system (functional) ground is connected to the field ground, which is not isolated. For the higher noise immunity, floating the field power supply is recommended.
*2: When the withstanding voltage of the field power supply between the secondary side and the ground is lower than the value shown in the table above, these voltages are adopted as the withstanding voltage of the field power supply.
*3: Number of output channels which a user can use and maximum load current are restricted in case of SDV531-LC. Refer to “ProSafe-RS Outline of I/O Modules (for FIO)” (GS 32P06K60-01EN).
*4: External power supply of SDV531-S style code S1 and S2 is 24 V DC ± 5%.
*5: Do not exceed this value, including the case of inrush/variation of the load current.
*6: Resistance value of the load for both ON and OFF state, including the field wiring resistance.
*7: When connecting SDV531 and SED4D terminal board using AKB331 dedicated signal cable, the withstand voltage is 500 V AC (between output signal lines and system). If MIL connector cables are used, the withstand voltage depends on their cable’s electrical specifications.
*8: AKB651 can be used for connection with SDV531-L only.
*1: When SDV531-6 or -F is selected, you cannot choose the option code for a pressure clamp terminal block and MIL cable connector.
*2: When this module is used in dual-redundant configuration, order an additional module with the same specification but without option codes.
*3: When SDV531-6 or -F is selected, you can choose the option code for prevention pin of false insertion. A mechanism to prevent wrong type I/O module insertion is supported with signal cable. The signal cable used with this I/O module must have option code /SDV531, /SDV53L or /DV53L.
*4: Suffix Code for “With ISA Standard G3 and high-density installation” is available in case of SDV531-LC. This is not available in case of SDV531-S.
YOKOGAWA SCP451-11 PROCESSOR MOUDLE CPU 100% Brand New. 365 days warranty.
YOKOGAWA EB401-10 COMMUNICATION MODULE DCS CS-3000 NEW 100% Brand New. 365 days warranty.
YOKOGAWA PCB Card
YOKOGAWA AAI543-S00 Analog Output Module JAPAN MADE 100% Brand New. 365 days warranty.
YOKOGAWA ESB Bus Cable (36-36 pins)
YOKOGAWA CP345 CPU PROCESSOR MODULE JAPAN 100% Brand New. 365 days warranty.
YOKOGAWA PW482-10 Power Supply Module ORIGINAL JAPAN PW482 100% Brand New. 365 days warranty.
YOKOGAWA Base module
To get lowest price with best original quality,pls don`t hesitate to leave a message here.Thank you!
Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen (Building B of Diamond Coast)
